Rental Instructions

Tables
How to Use:
  • Place table on a flat, stable surface

  • Stand table upright and begin unfolding legs halfway

  • Locate the red center locking latch underneath the table

  • Release the latch to unlock the tabletop

  • Carefully open the table until it is fully flat

  • Ensure legs lock securely into position

  • Lightly press down to confirm stability

TIPS

  • Distribute weight evenly across the surface

  • Do not stand or sit on the table

  • Do not force open or close if resistance is felt

  • Do not place hot object directly on table

Cleaning Requirements:

  • Wipe surface with a damp cloth and mild soap if needed

  • Remove all food, drinks, tape, or sticky residue

  • Do not place hot objects (pots, pans, heaters, etc.) directly on the table

  • Do not use bleach, harsh chemicals, or abrasive scrubbers

  • Ensure table is completely dry before returning

Packing & Return Instructions:

  • Remove all items before folding

  • Wipe down any spills or debris

  • Fold legs inward carefully

  • Secure the red center locking latch before closing

  • Stack carefully to avoid damage or scratching

How to Use:

  • Open chair fully until locking mechanism clicks

  • Place on flat, stable ground before sitting

  • Do not rock or tilt while seated

  • Use only for sitting (not standing or stepping)

Cleaning Requirements:

  • Remove all spills, dirt, or food before return

  • Allow chairs to fully dry before stacking

  • Avoid water on metal joints or hinges

Packing & Return Instructions:

  • Stack neatly (10–15 chairs per stack recommended)

  • Align legs carefully to avoid bending

  • Keep stacks stable during transport

 

⚠️ QUICK SAFETY WARNINGS:

  • Keep hands, fingers, and foreign tools completely out of the ice shaving hopper chute. The 4-blade assembly rotates at 2000 RPM and is razor sharp.
  • Never bypass or tamper with the automatic safety micro-switch built into the hopper handle.

SETUP

Step 1: Setup & Connection

Place the machine on a flat, stable surface. Ensure the Water Drain Pipe is secured to the bottom outlet hole of the storage box and route it to a bucket or drain if indoors. Plug machine into a grounded outlet.

LOAD ICE

Step 2: Load Shaving Hopper

Lift the handle completely up to open the hopper entry. Drop solid ice cubes inside.

Note: The machine features an automatic cutoff switch and will not spin while the handle is lifted.

SHAVE

Step 3: Turn On & Press Down

Press the Power Switch ON. Firmly press down on the handle; the blades will instantly shave the ice directly into the 11-gallon storage box below. Release handle when empty.

CLEAN

Step 4: Post-Use Wipe Down

Press the power switch OFF and unplug. Use the provided scoop to empty leftover ice. Wipe the storage box  with a clean, dry cloth to remove moisture. Leave box door cracked open to dry.

PACK UP

Step 5: Pack & Return

Once the machine has completely cooled down, safely disconnect any loose components. Neatly place all items back inside the storage container to ensure everything stays together for return.

 
✅ Please return these items together in the container provided:

  1. Machine
  2. Water Drain Pipe
  3. Plastic Ice Scoop
  4. Metal Spoon
  5. Power Cord
  6. The Instruction Sheet

 

⚠️ QUICK SAFETY WARNINGS:

  • The spinning head and bowl get extremely hot. Never touch them until fully turned off and cooled down.
  • Keep children at a safe distance. Adults must supervise and operate this machine at all times.

SETUP

Step 1: Setup & Preheating

Lock the stainless bowl onto the base clips. Place the dome on top. Plug in and turn Power & Heat ON. Turn the voltage knob to max (100V-110V) and let it idle empty for 5-6 minutes.

ADD SUGAR

Step 2: Add Floss Sugar

Turn the motor off briefly. Use the Sugar Scoop to add one full level scoop of colored floss sugar directly into the center of the heating spinning head. Do not overfill.

SPIN

Step 3: Collect & Twirl

When sugar webs appear (approx. 30 sec), roll a paper cone around the inner bowl wall. Then, hold the cone

horizontally above the head and twirl it to build a big fluffy cloud.

CLEAN

Step 4: Self-Cleaning & Wipe

Pour approx. 25 ml of warm water using the clear squeeze bottle into the spinning head to steam out residue.

Turn off and unplug. Once cooled, lightly wipe the dome cover with a damp cloth to rid it of stray sugar.

PACK UP

Step 5: Pack & Return

Once the machine and components have completely cooled down, neatly place all items back inside the

storage container to ensure everything is grouped together for return.

‘

✅ Please return these items together in the container provided:
  • Machine
  • Dome Cover
  • Sugar Scoop
  • Clear Squeeze Bottle
  • Power Cord
  • The Instruction Sheet
How to Use:

  • Place boards on flat ground facing each other

  • Standard distance: 27 feet for adult play

  • Toss bean bags toward target hole

  • Play individually or in teams

  • Ensure boards remain level for proper gameplay

Cleaning Requirements:

  • Wipe boards with a damp cloth if needed

  • Shake out or brush off bean bags

  • Do not soak boards or bags in water

Packing & Return Instructions:

  • Place all bean bags back into storage bag

  • Stack boards flat for transport

  • Ensure all pieces are included before return

How to Use:

  • Stack blocks in alternating layers of 3

  • Players take turns removing one block at a time

  • Place removed block on top of tower

  • Continue until tower falls

  • Use on flat ground for safety

Cleaning Requirements:

  • Wipe blocks with dry or slightly damp cloth if needed

  • Keep wood completely dry at all times

  • Do not soak or expose to excess moisture

Packing & Return Instructions:

  • Restack blocks neatly if possible

  • Place all pieces into carrying bag

  • Confirm all blocks are included before return